View 2SK3365_167671.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
2SK3365
SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE
DESCRIPTION
The 2SK3365 is N-Channel MOS Field Effect Transistor designed for DC/DC converters application of notebook computers.
ORDERING INFORMATION
PART NUMBER 2SK3365 2SK3365-Z PACKAGE TO-251 TO-252
FEATURES
* Low on-resistance RDS(on)1 = 14 m (MAX.) (VGS = 10 V, ID = 15 A) RDS(on)2 = 21 m (MAX.) (VGS = 4.5 V, ID = 15 A) RDS(on)3 = 29 m (MAX.) (VGS = 4.0 V, ID = 15 A) * Low Ciss : Ciss = 1300 pF (TYP.) * Built-in gate protection diode
ABSOLUTE MAXIMUM RATINGS (TA = 25 C)
Drain to Source Voltage (VGS = 0 V) Gate to Source Voltage (VDS = 0 V) Drain Current (DC) Drain Current (Pulse)
Note
VDSS VGSS ID(DC) ID(pulse) PT PT Tch Tstg
30 20 30 120 36 1.0 150 -55 to + 150
V V A A W W C C
Total Power Dissipation (TC = 25 C) Total Power Dissipation (TA = 25 C) Channel Temperature Storage Temperature Note PW 10 s, Duty cycle 1 %
THERMAL RESISTANCE
Channel to case Channel to ambient Rth(ch-C) Rth(ch-A) 3.48 125 C/W C/W
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D14255EJ1V0DS00 (1st edition) Date Published September 1999 NS CP(K) Printed in Japan
(c)
1999
2SK3365
ELECTRICAL CHARACTERISTICS (TA = 25 C)
CHARACTERISTICS Drain to Source On-state Resistance SYMBOL RDS(on)1 RDS(on)2 RDS(on)3 Gate to Source Cut-off Voltage Forward Transfer Admittance Drain Leakage Current Gate to Source Leakage Current Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Body Diode forward Voltage Reverse Recovery Time Reverse Recovery Charge VGS(off) | yfs | IDSS IGSS Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) trr Qrr IF = 30 A, VGS = 0 V IF = 30 A, VGS = 0 V di/dt = 100 A/s ID = 30 A, VDD = 24 V, VGS = 10 V ID = 15 A, VGS(on) = 10 V, VDD = 15 V, RG = 10 TEST CONDITIONS VGS = 10 V, ID = 15 A VGS = 4.5 V, ID = 15 A VGS = 4.0 V, ID = 15 A VDS = 10 V, ID = 1 mA VDS = 10 V, ID = 15 A VDS = 30 V, VGS = 0 V VGS = 20 V, VDS = 0 V VDS = 10 V, VGS = 0 V, f = 1 MHz 1300 405 190 37 500 75 95 25 4.5 7.0 1.0 35 32 1.5 8.0 MIN. TYP. 11.5 15.2 18 2.0 16.0 10 10 MAX. 14 21 29 2.5 UNIT m m m V S
A A
pF pF pF ns ns ns ns nC nC nC V ns nC
TEST CIRCUIT 1 SWITCHING TIME
D.U.T. RL
VGS VGS
Wave Form
TEST CIRCUIT 2 GATE CHARGE
D.U.T. IG = 2 mA PG.
90 % 90 % ID
PG.
RG RG = 10
0 ID
10 %
VGS (on)
90 %
RL VDD
VDD
50
VGS 0
= 1s Duty Cycle 1 %
ID
Wave Form
0
10 % td (on) ton tr td (off) toff
10 % tf
2
Data Sheet D14255EJ1V0DS00
2SK3365
TYPICAL CHARACTERISTICS (TA = 25 C)
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA 70
TOTAL POWER DISSIPATION vs. CASE TEMPERATURE
dT - Percentage of Rated Power - %
PT - Total Power Dissipation - W
100 80 60 40 20
60 50 40 30 20 10 0 20 40 60 80 100 120 140 160
0
20
40
60
80
100 120 140 160
TC - Case Temperature - C
TC - Case Temperature - C
FORWARD BIAS SAFE OPERATING AREA
TC = 25C Single Pulse
=
s
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 120 VGS =10 V 100 Pulsed
100
ID - Drain Current - A
10
0
1m
s
ID - Drain Current - A
d ite im V) 0 )L on =1 S( RD VGS t (a ID(DC) = 30 A
ID(PULSE) = 120 A
PW
80 60 40 20
4.5 V
10
Po
we
r D 100 ms iss m ipa s tio nL im i
10
ted
4.0 V
1
1
10
100
0
1
2
3
4
VDS - Drain to Source Voltage - V
VDS - Drain to Source Voltage - V
FORWARD TRANSFER CHARACTERISTICS 1000 100
ID - Drain Current - A
10 1 0.1 0.01 TA = 25C -25C -50C 1 2 3 4 5 Pulsed 6 7 TA = 150C 75C
0.001 0
VGS - Gate to Source Voltage - V
Data Sheet D14255EJ1V0DS00
3
2SK3365
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH 1 000
rth(t) - Transient Thermal Resistance - C/W
Rth(ch-A) = 125 C/W 100
10 Rth(ch-C) = 3.48 C/W
1
Single Pulse 0.1 100 1m 10 m 100 m 1 10 100 1000
PW - Pulse Width - s
100
| yfs | - Forward Transfer Admittance - S
Tch = -50C -25C 25C 10 Tch = 75C 150C 1
VDS = 10 V Pulsed
RDS(on) - Drain to Source On-state Resistance - m
FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 50 Pulsed 40
30 20
ID = 15 A
10
0.1 0.1
1
10
100
0
5
10
15
ID- Drain Current - A
VGS - Gate to Source Voltage - V
RDS(on) - Drain to Source On-state Resistance - m
100
VGS(off) - Gate to Source Cut-off Voltage - V
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT
GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE 2.5 VDS = 10 V ID = 1 mA 2
Pulsed
80 VGS = 4.0 V 4.5 V
60
1.5
40
1 0.5 0
20 0 0.1
10 V
1
10
100
1000
- 50
0
50
100
150
ID - Drain Current - A
Tch - Channel Temperature - C
4
Data Sheet D14255EJ1V0DS00
2SK3365
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 30
ISD - Diode Forward Current - A
SOURCE TO DRAIN DIODE FORWARD VOLTAGE Pulsed
VGS = 4.0 V 4.5 V 20 10 V
100
VGS = 10 V 0V
10
1
10
0.1 0.01 0
0
ID = 15 A - 50 0 50 100 150
Tch - Channel Temperature - C
1.2 0.8 1.6 0.4 VSD - Source to Drain Voltage - V
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 10000
SWITCHING CHARACTERISTICS
td(on), tr, td(off), tf - Switching Time - ns
Ciss, Coss, Crss - Capacitance - pF
VGS = 0 V f = 1 MHz
tr 1000 tf 100 td(on) td(off)
1000
Ciss
10 VDD = 15 V VGS = 10 V RG = 10 1 10 100 ID - Drain Current - A
Coss 100 0.01 Crss 0.1 1 10 100
1 0.1
VDS - Drain to Source Voltage - V
REVERSE RECOVERY TIME vs. DRAIN CURRENT 1000
trr - Reverse Recovery Time - ns
VDS - Drain to Source Voltage - V
30 VDD = 24 V 15 V 6V VGS VDS
12 10 8 6
100
20
10
10
4 2
1 0.1
1
10
100
0
10
20
30
40
0
IF - Diode Current - A
QG - Gate Charge - nC
VGS - Gate to Source Voltage - V
di/dt = 100 A/s VGS = 0 V
DYNAMIC INPUT/OUTPUT CHARACTERISTICS 40 ID = 30 A 14
Data Sheet D14255EJ1V0DS00
5
2SK3365
PACKAGE DRAWINGS (Unit : mm)
1) TO-251 (MP-3) 2) TO-252 (MP-3Z)
1.5-0.1
+0.2
6.50.2 5.00.2 4
2.30.2 0.50.1
0.8 4.3 MAX.
6.50.2 5.00.2 4
1.5-0.1
+0.2
2.30.2 0.50.1
1.60.2
5.50.2
1
2
3
13.7 MIN.
7.0 MAX.
1
2
3
1.10.2
+0.2
0.5-0.1
2.3 2.3
0.5-0.1
1.Gate 2.Drain 3.Source 4.Fin (Drain)
+0.2
0.9 0.8 2.3 2.3 MAX. MAX. 0.8 1. Gate 2. Drain 3. Source 4. Fin (Drain)
EQUIVALENT CIRCUIT
Drain
0.75
Gate
Body Diode
Gate Protection Diode
Source
Remark
The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device.
6
Data Sheet D14255EJ1V0DS00
0.7
1.10.2
2.0 MIN.
5.50.2 10.0 MAX.
1.0 MIN. 1.8 TYP.
2SK3365
[MEMO]
Data Sheet D14255EJ1V0DS00
7
2SK3365
* The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. * While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. * NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.
M7 98. 8

▲Up To Search▲

Price & Availability of 2SK3365

	To Download 2SK3365 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .